The KGE1-1AF mining magnetic proximity switch CJK-32-KB, CY-1, CY-2, KCY-1, KCY-2, CJK-1Z/T, CJK-1Z-K/T, CJK-3Z-K/T, CKG-3Z, CJK-32-K/T, FBK-1, FBK-2, FBK-3, and KGE1 series mining sealed magnetic induction switches are mainly used in mining shafts. Commonly used aliases include KGE1 shaft switch, KGE shaft switch, KGE1 in position switch, KGE1 in position switch, KGE1 in position switch, KGE1 in position switch, KGE1 against filling switch, KGE against filling switch, etc. KGE1-1 represents a set of contacts, which are 5-core wires (1 set of normally open and 1 set of normally closed). KGE27, CJK-1C, CJK-2C, CJK-3C, CJK-4C, CJK-5C, CJK-1Z, CJK-2Z, CJK-3Z, CJK-4Z, CJK-5Z, CJK-1C -, CJK-1C/CJK-1Z-KB, CJK-2Z-KB, CJK-3Z-KB, CJK-4Z-KB, CJK-5Z-KB, KGE1-2 represents two sets of contacts, which are 8-core wires. Our company's mining series magnetic induction switches include KSC1010G series magnetic induction switches, KYCJ series, CY series, CJK series, and KSA series proximity magnetic switches. BGK-II, KYCX-10, KYCX-1, KYCJ-1Z, KYCJ-1F, KHC100, KMW120G, KSC1010G, KSC1010G-1/220 companies have developed TCK series magnetic switches and KGE mining sealed magnetic induction switches for use in mining industry shafts.
Shandong Zhuoxin Electric's mining permanent magnet limit switch
KGE1-1AF mining sealed magnetic induction switch, universal magnetic switch, KGE1-1, type magnetic switch, KGE1-2, KGE1-2T, KGE1-2T P, KGE1-1AP, KGE1-1T, KGE1-1P, KGE27, TCK-1T, TCK-1P, TCK-2P, TCK-1, TCK-2, and TCK-2TTCK-T are type magnetic switches, while TCK-P is a universal type magnetic switch. Holding type magnetic switch TCK-3, TCK-4, TCK-3T, TCK-4T, TCK-3P, TCK-4P, TS-250 TS-360 TS-500 S-250EX S-360EX S-500EX * Magnet
How to wire the magnetic switch? The wiring diagram of magnetic switches is as follows: There is a difference between two wire and three wire proximity switches. Three wire proximity switches are further divided into NPN and PNP types, and their wiring is different. The wiring of the two wire proximity switch is relatively simple. The proximity switch is connected in series with the load and then connected to the power supply. Wiring of the three wire proximity switch: connect the red (brown) wire to the positive end of the power supply; Connect the blue wire to the 0V end of the power supply; The yellow (black) line represents the signal and should be connected to the load. And the other end of the load is connected as follows: for NPN type proximity switches, they should be connected to the positive end of the power supply; For PNP type proximity switches, they should be connected to the 0V end of the power supply. Precautions for using magnetic switches: (1) Voltage and current should avoid exceeding the range of use. (2) Magnetic switches are strictly prohibited from being directly connected to the power supply and must be used in series with the load (such as relays). (3) Before selecting a magnetic switch for connection, it is necessary to confirm the working power supply used. When using a DC power supply, the red wire of the magnetic switch should be connected to the positive pole of the power supply. (4) Please avoid using magnetic switch cylinders in environments with strong magnetic fields and high currents. If you want to use them, please add shielding devices. (5) Select cylinder accessories: Select cylinder accessories according to the requirements of action and connection. KGE1-1AF Mining Magnetic Proximity Switch