C25315-A39-A3 wellbore magnetic switch, lead time for a few days, usage
  This usage is to fix the permanent magnet on the side wall of the lifting container, install the magnetic switch on the designated position of the wellbore, wellhead, or mast, and make the switch end face sensor run up and down towards the track space of the magnet. During the lifting process, when the magnet on the container reaches the magnetic switch position, the switch acts and sends out signals such as deceleration and parking. The C25315-A39-A3 wellbore magnetic switch has a delivery time of several days. How to use the wire rope magnetic field source
  This usage is paired with a wire rope magnetizer and demagnetizer. First, choose a place where the swing of the hoist wire rope is relatively small, such as under the drum, guide wheel, or crown wheel. Install the magnetic switch next to the wire rope, with the switch end face sensor facing the wire rope, and the distance between the switch end face and the rope is less than 50mm. Then use a wire rope magnetizer to magnetize at the corresponding position on the wire rope. During the lifting process, when the magnetization section of the steel wire rope reaches the magnetic switch position, the switch acts and sends out signals such as deceleration. Its application principle is similar to a magnetic tape recorder, which records the position signal on a steel wire rope. During operation, the magnetic switch detects the recording point and sends out a position signal. The product structure and working principle are composed of a magnetic sensor, electronic circuits, and output switches. When the magnetic field enters the area of the magnetic sensor, the switch operates under the action of the magnetic field, outputs a switch signal, reflects the detected position and movement direction, and serves as the stroke position signal of the control system< The KGE1 series magnetic switch adopts fault-tolerant hot backup and technology, which has achieved good technical indicators and performance. It is suitable for mines with relatively fixed lifting containers. It is resistant to impact, waterproof, and can work reliably in mine shafts without maintenance. 1. This product adopts new technology and aviation materials, with a power consumption of only 50 milliwatts< br />2、 This product adopts circuit technology to reduce signal false alarms< br />3、 This product adopts a new technology and provides positioning, with positioning controlled within 3 millimeters< br />4、 This product has strong capabilities, good waterproof performance, long action distance, temperature resistance, and is suitable for certain requirements. C25315-A39C25315-A39-A1C25315-A39-A2C25315-A39-A4C25315-A39-A5C25315-B39-A1C25315-B39-A2C25315-B39-A4C25315-B39-A5V24584-G9-A4V24584-G9-A5V24584-G9-A6NI8-M18-AZ3X/S90 5M、NI8-M18-AZ3X/S90 6M、BI5-M18-RZ3X、BI5-M18-RZ3X 4M、BI5-M18-RZ3X 5M、BI5-M18-RZ3X 15M、NI8-M18-RZ3X、NI8-M18-RZ3X/S90、BI10-M30-AZ3X、