Introduction to KG1010-N Mining Intrinsic Safety Magnetic Sensor Switch Magnetic Proximity Switch Magnets are divided into two types: electromagnets and permanent magnets, and can be selected according to control needs. The switch contacts are divided into three forms: normally open contact, normally closed contact, and transfer control contact, which are also selected according to actual needs. The magnet and contact should be installed on the same axis, and the distance between the two should be within the working distance< The strong magnetic voltage of the electromagnet is designed as C24V pressure magnetic, which is reliable. The contacts of the magnetic proximity switch and the outer cover of the electromagnet are made of brass and cast aluminum, respectively. Internally, it adopts anti vibration, heat insulation, and sealing measures to meet the needs of users in harsh environments. Shandong Zhuoxin's magnetic proximity switch is a domestically produced product. Due to the use of magnetic induction principle, the magnetic proximity switch fundamentally solves the impact caused by any electric field interference. This series of switches has a long operating distance, strong performance, good sealing performance, stable and reliable magnetic force, and a hemispherical working characteristic. It is easy to install, has a long service life, and can work in high temperatures, temperatures, and harsh environments. They are widely used as position control switches in steel rolling, coking, shipbuilding, mining, lifting, transportation, and other fields, or replace the original slide contactor mechanical limit switches. They are domestically produced products and components that achieve contactless transmission of control signals. The main uses and characteristics of KG1010-N intrinsically safe magnetic sensor for mining. This series of magnetic proximity switches has an intrinsically safe structure and is IP54. Adopting the principle of magnetic induction, it is resistant to collisions and has strong capabilities. Mainly used to detect the position of moving objects, when the magnetic steel on the moving object passes by, the proximity switch contacts act. The memory type proximity switch has a memory function when it opens and closes when it returns. Widely applicable to coal mines, chemical industries, and petroleum hazardous areas, it is a sensor in automatic control systems. Technical indicator (1) Output signal of proximity switch: When the contact is conducting, the voltage drop should not exceed 0.5V (injecting current 1A); When the contact is disconnected, the output resistance should not be less than 100K Ω (applied voltage DC 12V); (2) Contact form: normally open; (3) Action point distance: not less than 120mm; (4) Magnetic steel size: 290mm x 77mm x 48mm; (5) Magnetic induction strength of magnetic steel: 1GS~3500GS; (6) Contact capacity: 12V/1AKG1010-N 1A 220V mining magnetic proximity switch FH48-K-F2 anti slip switch TQK-15-40 waterproof secondary deviation switch TFSSL-II waterproof two-way pull rope switch TLQ6-2K-F temperature resistant inductive proximity switch WLCA2-2N limit switch ELAW-31, AC250V marine pull rope switch ESPB-041 marine slip switch TLE100-2H-G temperature resistant proximity switch TLZ20-3PK-F temperature resistant proximity switch FH48-30K-F2 slip switch SP304H 15W speaker ESPB-041 slip switch magnetic switch CS1-F magnetic switch BJQ-B resistance Rotary switch ZYZ-20 AC220V 3W electronic slip detection switch H-III (YGH-220)