Instructions for using T1705-KHC60-1 track sensor T1705-KHC60-1 is a new type of switch developed in automation, which is used in conjunction with essential electrical equipment. It is a sensor for the mechanical body of the wellhead door, loading and unloading gate, shaking table, and trolley machine to lock in place. The outer shell is made of brass casting and machined, with characteristics such as impact resistance, strength, dust prevention, and waterproofing. The inner core is sealed with epoxy resin adhesive, which reduces the risk of electric arcs and improves reliability. The control magnet is made of stainless steel and fixed in the shell using pouring technology. It has stable performance and can be directly installed on iron materials without causing short circuits in the magnetic field. Technical indicators: Action distance: 50-100mm, reset distance: 100-190mm, output contact form: 2 sets of normally open contacts, contact resistance: 0.3, magnetic steel surface magnetic field strength: 500-1100g, contact capacity: 15v/130maT1705-KHC60-1. The usage instructions for the track sensor are essential equipment and can be used in hazardous areas. This sensor needs to be installed on the railway track to detect the direction of the train, the number of axles passed, and determine the speed. It has a sensor * point. Use with our company's T1705-KXB15 intrinsically safe mining sound and light warning set. This sensor has a voltage output type, which is the level during normal standby. When a train passes through the head, it outputs a certain width of pulse level. This sensor has three wires: red wire to KC12v, white wire to ground, and blue wire for signal output. When installing, face the sensing window towards the object being tested and open the sensor horn and cover plate. Thread the cable into the junction box, connect the wires correctly, tighten the horn and cover plate, and fix the sensor to the rail belly with 8mm screws. The distance between the upper end face of the sensor and the rail plane is 38mm-4mm. Technical indicators: Intrinsic safe working voltage: C15V, input current: 5-7mA, large operating distance: 24mm, allowable axial swing distance of wheelset: 60mm, operating environment temperature: -20 ° C~+40 ° C, relative temperature: 100 ° C, altitude: -1000M~2000M, atmospheric pressure: 80-106KPa, allowed for use in environments with gas and coal dust hazards& nbsp;