The GUC-50 proximity sensor for mining intrinsic safety position is designed according to the requirements of various automation systems in coal mines. The GUC-50 proximity sensor is used to determine the state or position of objects. The intrinsically safe position sensor for mining can be used in any intrinsically safe circuit. Technical characteristics of intrinsically safe position sensors for mining: 1. The intrinsically safe position sensor for mining consists of two parts, with a compact structure, simple wiring and installation, and convenient maintenance. 2. When a strong magnetic object is within a range of 0-15mm from the sensor, the normally open contact of the mining intrinsic safety position sensor conducts a signal. 3. The intrinsically safe position sensor used in mining adopts a contactless switch form, which converts the opening and closing status and orientation of the object into a signal and sends it to the detection circuit of the associated equipment. The intrinsically safe position sensor used in mining achieves automation of the electrical control device together with the associated equipment. 4. The intrinsically safe position sensor for mining can be connected and used with air door devices, driver controlled switch devices, and sports car protection devices. Technical parameters a)  Action distance range (mm): 0-15b); Output contact form: a pair of normally open contacts c)  Contact resistance (Ω):≤ 0.2）  Contact capacity: C; 12.5V/1A photoelectric sensor, photoelectric eye CDD-11N、CDD-40N、CDD-40P、 Photoelectric switch OPTEX、CRDF-100P、CTD-1500N、CTD-1500P、CTD-1500C、CRD-300N、CRD-300P、CRDF-100N、CDA-11L、CDA-11D、CTA-1500L、CTA-1500D、CRA-300L、CRA-300D、CRAF-100L、CRAF-100D、CRDF-100P、CTD-1500N、CTD-1500P、CTD-1500C、CRD-300N、CRD-300P、CRDF-100N、CDA-40L、CDA-40D、