Magnetic switch induction type magnetic switch CK3-Y16 body parameters CK3-Y16, HANGRON/ZHUOXIN working voltage 24-220C/AC current 100mA 10W. The magnetic switch cylinder is installed in a closed metal or plastic tube with one or more magnetic spring switches, and then the tube is penetrated through one or more hollow floating balls with ring shaped magnets inside. A fixed ring is used to control the floating ball and magnetic spring switch in the relevant positions, so that the floating ball can float up and down within a certain range. Use the magnet inside the floating ball to attract the contact point of the magnetic spring switch, generating opening and closing actions. 1、 Requirements for designers and users of pneumatic systems: 1. Confirmation of product model and specifications before use. The designers of pneumatic systems and pneumatic component designers should determine the specifications of pneumatic components based on the performance requirements proposed for the pneumatic system, taking into account performance and potential failures, and according to new product samples and materials. If necessary, corresponding analysis and experiments should be conducted. When used in certain emerging industries or industries, it is necessary to collaborate with manufacturers to carry out styling design work in order to *. 2. Special attention should be paid to the following situations: 1) If compressed air is used incorrectly, it can be dangerous. Therefore, the assembly, operation, and maintenance of pneumatic equipment should be carried out by trained and experienced personnel; 2) Before confirmation, it is not allowed to use pneumatic equipment or disassemble pneumatic components from the equipment; 3) After confirming that the above treatment has been carried out, cut off the power and air supply, and discharge the remaining compressed air in the pneumatic system before maintenance and disassembly can be carried out; 4) Before starting the pneumatic equipment, it is necessary to confirm that there will be no rapid extension of the plug rod. 2、 The requirements for the use environment of pneumatic systems: 1. When used in environments with corrosive agents, chemicals (such as organic solvents), seawater, water, and non steam, or in places where the above substances are attached, they can be used conditionally. Seals, valve bodies, etc. that come into contact with the medium need to be changed to materials; 2. Avoid using in sexual settings (if necessary, consider taking measures); 3. Do not use in situations with vibration and impact, or the vibration and impact resistance of various pneumatic components should comply with the regulations on the product sample. 4. Do not use in places with heat sources or affected by radiation, or take measures to block radiation heat; 5. In places with strong direct sunlight, add protective covers. Appropriate protective measures should be taken when using in places with high humidity, high dust content, or places with water droplets, oil droplets, cutting oil, or coolant droplets. Magnetic cylinders should not be used in environments with strong magnetic fields. 6. In a temperature environment: 1) In a temperature environment: please use temperature resistant seals; 2) In a warm environment, there may be phenomena such as water freezing and poor operation in the circuit. At this time, attention should be paid to removing water to prevent freezing. 3、 The requirements for compressed air in pneumatic systems: 1. Compressed air discharged by the air compressor cannot be directly used. Compressed air contains a certain amount of water, oil, and dust. After compression, the temperature of the air reaches around 140-170 ℃, and some of the water and oil have become gaseous; 2. Using purified compressed air, Shandong Zhuoxin Machinery Co., Ltd. mainly produces pneumatic components, mining appliances, proximity switches, photoelectric switches, Hall sensors, magnetic switches, speed sensors, gear sensors, two-stage deviation switches, bidirectional rope switches, slip switches, belt slip detection devices, material level monitors, speed and underspeed switches, coal stacking switches, coal flow switches, tilt switches, tear switches, belt conveying device control cabinets, sound and light warning devices, and other industrial control appliances. The company integrates the development and manufacturing of cylinder magnetic switch series, solar iron series TAIYO magnetic switches, SR101, SR201, SR401, YR201, CK-TOHCKD-T2H, CK3-X1, CK3-X1, and other industrial control appliances. Y1, CK-AD, CK3-U, CK3-V1C magnetic switches D-A93、D-A54、D-C73、D-A73、 Magnetic switch induction magnetic switch CK3-Y16