When the XT-LG-20 inclined switch of the coal blocking level meter is subjected to external force and deviates from the vertical position by more than 15 degrees, the internal contacts of the switch will act, and the normally closed contacts will open (or the normally open contacts will close). After the external force is removed, the tilt switch is approved to the vertical position, and the contacts are closed (or disconnected) again. Use the changes in the opening and closing of the internal contacts of the ETS-9 tilt switch to infer the working condition of the equipment, in order to timely approve measures and defend the equipment. Reference for user selection data of XT-LG-20 tilt switch: 1. Rated contact: 24V/220VAC/2A2. Rated temperature: -20~100 ℃ (customizable at 200 ℃) 3. Shell material: stainless steel 4. Cable length: 6000mm (customizable) 5. Probe length: 180mm6. Total probe length: 210mm7. Tail connection thread: M20× 1.5× 508. Product weight: 1.2kgXT-LG-20 tilt switch is a detection device used to detect whether there is blockage in the falling part of the belt conveyor during the conveying of loose materials, and to generate an alarm and stop status when tilting occurs during blockage& nbsp;HE3025B  HE3025A  HD2020AB  HD2010B  HD2020A HD3020AL  HD3020D  HD3020C  HD3020B  HD3020A  HY2030AB  HY2030B  HY2030A  HY3030BL  HY3030AL  HY3030CD  HY3030D  HY3030C  HY3030AB  HY3030B  HY3030A  HY2020AB  HY2020B  HY2020A  HY3020BL  HY3020AL