PLR39 plastic tilt switch controller PLR39 plastic tilt switch controller tilt switch probe& nbsp;      When the tilt switch probe of the vertical suspension is subjected to external force and deviates from the vertical position by more than 15 degrees, the metal ball contact inside the switch will act, and the normally closed contact will open. After the external force is removed, the tilt switch returns to the vertical state, and the metal ball contacts close again. Using the changes in the opening and closing of the internal contacts of the tilt switch to determine the working condition of the equipment, in order to take timely measures and achieve the purpose of safety protection; The tilt switch controller has two structural forms: one is PLR38 metal type, and the other is PLR39 plastic type, with a protection level of IP65, and the front panel is equipped with indicator lights< br />        There is an adjustable time delay of 0-10 seconds in the control device, which can avoid misoperation of the tilt switch probe caused by instantaneous tilt< br />        In the control device, select vertical or inclined as the normal state through jumper selection< br />        Two normally open and normally closed contacts are used for external alarms or control& nbsp; Features: The tilt switch can be used alone with the probe or in conjunction with the control device. The alarm output time is adjustable, and the control device has an adjustable delay circuit of 0-10 seconds, which can avoid false operation of the tilt switch caused by instantaneous tilt. The normal/alarm position can be set, and there is a jumper in the control device that can set the switch to a normal or tilted state. It is sturdy, corrosion-resistant, and easy to install. The control device is a printed circuit board structure, and all probes are equipped with installation accessories; LJ10A3-1.5（3）-J/DE & nbsp;LJ10A3-1.5（3）-J/EZ & nbsp;LJ10A3-1.5（3）-Z/EX & nbsp;LJ10A3-1.5（3）-Z/AX & nbsp;LJ10A3-1.5（3）-Z/BY & nbsp; LJ8A3-1（2）-J/DZ & nbsp;LJ8A3-1（2）-J/EZ & nbsp;LJ8A3-1（2）-Z/EX & nbsp;LJ8A3-1（2）-Z/AY & nbsp; LJ8A3-1（2）-Z/AX & nbsp; LJ8A3-1（2）-Z/BY & nbsp;LJ10A3-1.5（3）-Z/BX & nbsp;LJ6A3-1（2）-J/DZ & nbsp;LJ6A3-1（2）-J/EZ