Tilt switch MTS-200/300 tilt switch MTS-200/300 tilt switch MTS-200/300 working principle
The MTS-200/300 tilt switch detection head has a sturdy welded steel structure, which is sealed, waterproof, dustproof, anti fouling, and equipped with stress relief cables. The mercury switch inside the detection head is encapsulated in epoxy resin, which can resist harsh environmental conditions. When the detection head is vertical, the contacts close. When tilted approximately 15 degrees, the contacts open. The contact has a capacity of 230 Vac and 17 A. The detector comes with a 2.4-meter-long 18 gauge chloroprene rubber sheathed double wire cable, suitable for pipeline connection or separate wiring. Product Overview: The tilt switch is a simple system that includes a control unit and a detection head, widely used in the processing industry to detect the presence or absence of bulk materials< Typical applications include: high and low level alarms for material bins, detection of conveyor blockages, control of material depth in crusher slots, and detection of loading status for grading screens. For example, when the grading screen is correctly loaded, the detection head is in a normal or safe state vertically, and too much material will lift the detection head, causing it to tilt and sound an alarm. When the conveyor belt material flows normally, the detection head tilts to a normal state. If the material decreases, the detection head will fall into a vertical state and sound an alarm. The SCU-200 control unit provides a safe low-voltage power supply for the detection head, and selects whether the detection head is tilted or vertical through a switch; Security; When in the opposite position, an alarm will sound. At the same time, it also has a 1-99 second relay output delay, which can only activate the alarm when the position of the detection head continues to change, preventing erroneous alarms and ensuring the reliability of operation. On the surface of the casing, there is an indication of a 5A double pole double throw output relay; Security/Alarm; The indicator light for the status. The control unit also has failure protection, which immediately sends an alarm in case of relay failure or power failure. LJ18A3-5-Z/BX  LJ18A3-5-Z/AX  LJ18A3-5-Z/CX  LJ18A3-5-Z/BY  PS-05P2  PS-05P  PS-05N2  TCB-2080B  LJ2-15/212  LJ2-15/213  LJ2-15/214  LJ2-15G/211  LJ2-15G/212  LJ2-15G/213  LJ2-15G/214  TJ2-15/215  LJ2-P15/212  LJ2P-15/213  LJ2P-15/214  LJ2P-15/215  LJ2L-15-4/115  LJ2L-15G-4/114  LJ2L-15-4/115